BMRMQ - 2000 INT EXT SEMI-GLOSS TINT BASE

  • MSDS: BMRMQ
  • Manufacturer: PERVO PAINT CO
  • Product Name: 2000 INT EXT SEMI-GLOSS TINT BASE
  • National Stock Number: 8010-00N026199
Product Identification

Product ID:2000 INT EXT SEMI-GLOSS TINT BASE
MSDS Date:09/27/1988
FSC:8010
NIIN:00N026199
MSDS Number: BMRMQ

Responsible Party
PERVO PAINT CO
6624 STANFORD AVE
LOS ANGELES, CA 90001
US

Emergency Phone: 213-758-1147

Info Phone: 213-758-1147

Cage: 86483

Contractor
PERVO PAINT CO
LOS ANGELES, CA 90001 US

Telephone: 213-758-1147

Cage: 86483

Ingredients

MINERAL SPIRITS

CAS: 64742-86-5

RTECS: LX3296500

Fraction By Weight: 27.8%

ACGIH TLV: 500 PPM

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE IRRITATION, DRYING OF SKIN.
EXCESSIVE INHALATION CAUSES HEADACHE, DIZZINESS AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
WELL WITH SOAP AND WATER. INHAL: REMOVE TO FRESH AIR. INGEST: CALL
MD IMMEDIATELY .

Fire Fighting

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1.1%
Upper Limits:6%
Extinguishing Media:FOAM, CO*2, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . BLANKET FLAMES WITH ABOVE EXTINGUISHING
MEDIAS.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPORS MAY FORM EXPLOSIVE
MIXTURE WITH AIR.

Accidental Release

Spill Release Procedures:WIPE UP IMMEDIATELY AND SAFELY DISCARD
ABSORBANTS. IN THE EVENT OF LARGE SPILLS, DIKE AREA AND PUMP THE
MATERIAL TO A WASH TANK, INSURE THAT NO OPEN FLAMES OR SPARKS ARE
BROUGHT INTO CLOSE PROXIMITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FIRE EXTINGUISHER IN STORAGE
AREA. KEEP AWAY FROM OPEN FLAMES, SPARKS AND EXCESSIVE HEAT.
Other Precautions:USE WITH ADEQ VENTILATION, AVOID PROLONGED BREATHING
OF VAPORS, AVOID PROLONGED OR REPEATED SKIN CONTACT. HANDLE WITH
CARE, AVOID SPILLING DOT-37A-80.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING
EQUIPMENT, NIOSH/MSHA APPROVED AIR RESPIRATOR OR AIR HOSE MASKS
WHERE THERE IS AN OXYGEN DEFICIENCY.
Ventilation:LOCAL EXHAUST: IF NEEDED. MECHANICAL (GENERAL) EXHAUST: AS
NEEDED.
Protective Gloves:PROTECTIVE GLOVES AS NEEDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:308F,153C
Vapor Pres:2.1
Vapor Density:3.5
Spec Gravity:1.33
Evaporation Rate & Reference:0.16 (BUTYL ACETATE = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE LIQUID WITH MILD AROMATIC ODOR.
Percent Volatiles by Volume:47.4

Stability

Stability Indicator/Materials to Avoid:YES
CAN REACT WITH OXIDIZING MATERIALS WHEN HEATED TO DECOMPOSITION.
Stability Condition to Avoid:HEAT, SPARKS AND FLAME.
Hazardous Decomposition Products:CO*2.
Conditions to Avoid Polymerization:INSURE THAT NO OPEN FLAMES OR SPARKS
ARE BROUGHT.

Disposal

Waste Disposal Methods:DISPOSE OF IN CLOSED METAL CONTAINERS IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.